Product name: Battery Forced Internal Short Circuit Test Machine
Model number: GX-6055-CSM
This product is designed according to the latest requirements of
the latest IEC62133 standard UN38.3 and the Japanese industrial
standard JIS C 8714:2007. The simulated battery is subjected to
forced internal short-circuit test under certain ambient
temperature conditions or extruded test under normal temperature
conditions. The test box inner box is stainless steel. Material,
temperature uniformity, and air exhaust function (ie, exhaust
emission after the test is completed).
The control system is: PLC touch screen menu operation, the voltage acquisition data
frequency can reach 100 times / sec, and the test pressure,
pressure holding time, measured pressure, battery voltage, battery
deformation, voltage drop, etc. are set by PLC programming.
Temperature control box
The surface of the cabinet is highly sprayed, with a high-quality
appearance and a flat non-reactive handle. It is easy to operate,
safe and reliable.
Double-layer vacuum-coated window and Philips energy-saving
fluorescent lamp eliminate the need for wiper defogging and
maintain clear observation. The condition of the sample can be
observed at any time.
Originally imported French Tecumseh fully enclosed compressor, imported environmentally friendly
refrigerant, world famous brand of refrigeration equipment,
imported PLC touch screen system, easy to learn.
It has the power failure stop function, the power failure cold
start function, and the power failure hot start function.
With fault alarm, test end alarm.
Pressure, displacement, voltage, temperature test system
Power acquisition system
High-precision US SUNCELL force sensor with a capacity of 2000kg
and a force test accuracy of ±0.5% F.S.
Japan Matsushita AC servo motor.
Panasonic servo drive.
Worm gear reducer.
Taiwan imported high-precision ball screw and linear guide.
Temperature control adopts PLC control mode to make the control
more precise and the operation is more convenient;
Speed control range: 0.01~20mm/s;
The adjustment of the intermediate board has a fast thick strip and
a slow fine adjustment function;
After the test, it will automatically return to the origin and
Effective test width: 200mm (standard size);
Effective test stroke: 100mm (without clamp).
Overload emergency stop device;
Upper and lower stroke limit settings;
Automatic breakpoint stop function.
Temperature control box
Temperature range: -5 ° C ~ 100 ° C;
Resolution accuracy: ±0.1 °C;
Temperature fluctuation: ±0.5 °C;
Temperature uniformity: ±1.5 °C;
Limit low temperature: -5 ° C;
Heating rate: average 3 °C / min (from 0 ° C to 100 ° C, nonlinear
no-load, average temperature rise);
Cooling speed: average 1 °C / min (from 100 ° C to 0 ° C, nonlinear
no-load, average cooling);
Inner box size: W400×H500×D400mm;
Inner box material: 304 stainless steel plate, bottom
Outer box size: W1060×D 1600×H2100mm;
Machine weight: about 300kg
Power supply: 3∮, 220V, 50Hz, 5.5kW
Internal short circuit test system
Test load: 100kg
Load resolution: 1/10,000; unit conversion: kg, lb, N
Load accuracy: ≤0.5%F.S
Maximum multiple of force: 7 segments automatically switch;
Displacement resolution: 1/1000;
Displacement accuracy: ±0.01 mm;
Speed range: 0.01~20mm/s adjustable, common test speed: 0.1mm/s;
Effective stroke: 100mm (without gripper);
Test the maximum plane: 200 × 200mm (can be customized);
Internal short circuit workbench material: stainless steel plate,
plus Teflon tape, corrosion resistant;
Forced internal short-circuit head size: two sizes
Number of indenters: 5 of each;
Extrusion action: pressure is applied from top to bottom;